[UPDATE] Don’t Ignore These 6 French Drain Mistakes!

Spread the love

If you’re planning to put in a French drain there are a few aspects you must be aware of.

A French drain may sound like a fancy piece of equipment. It’s actually a gravel pit with an integrated pipe that is used to divert waters away from the house.

Gutters store rainwater when it flows off your roof. But an French drain redirects water onto the ground .

For instance, you could find a spot in your backyard where the water puddles gather following a storm. It is recommended to use the French drain to address the problem.

French drains also are great to prevent water from getting through your basement. In this case, water could build up against your foundation, and then seep in your basement. If you have an French drain, you can divert this water elsewhere.

Read on for the most the most common French drain blunders and tips on how to avoid these.

What exactly is French  Drain?

An French drain is essentially the gravel trench with the addition of a pipe which diverts water away from your home.

Rainwater flows down your roof and then collects in the gutters. A French drain is on the other hand is able to transfer water to the earth. In the event of a heavy downpour such as this one you may notice the formation of puddles of water within your yard. To solve the issue you can use the French drain system.

Water that is leaking into your basement could be stopped by the installation in the form of French drains. The water can pool on the foundation of your home and then get into your basement due to. But, having a French drain lets you redirect the water.

What is the reason they call the thing an French drain?

An French drain refers to a trench constructed in the soil to collect and drain water.

It is the French drain is known as the French drain due to the fact that it was initially developed by a Frenchman Alphonse Guerin who was living in Canada. Guerin invented this method to address the devastating flooding issues that plagued his property.

6 French Drain Mistakes

French drains are quite easy to install. However, many homeowners make a few mistakes during the installation process or when using. Here are some typical mistakes you can avoid making them

1.Not using the right gravel

To ensure the proper accessibility and drainage of your French drain, the right drainage rock is required. Fill material must be natural round stones. A riverbed is typically the source of high quality stones that have been polished by water flowing.

This kind of stone allows for an increased flow of material. If you choose the right stone, you don’t need to worry about pieces falling off and block drains in the French drain.

Try to locate 1 1/2 inch Round Rock If you can. To make the purpose of a French drain clean Round Rock is optimal.

Also Read :
How to Change Screen Brightness On WIndows 11
It’s crucial to choose the right type of stone in your French drain.

2. The slope is not suitable for installation.

The drain should be installed at a slope is necessary to allow the French drain to function properly. The slope must be declining at a rate of 1 percent. For each 100′ of French drain, that is equivalent to a drop of 1 foot.

Your property might have an naturally steeper slope which is perfectly fine. It’s important to be aware that a slope that is steeper produces more velocity.

In the end, erosion can be observed in the area of discharge. It is for this reason that the slope of your French drain needs to be planned in a manner that prevents erosion.

You must ensure that you have excavated the proper slope (or slope) of your French Drain installation, so that the water drains to the catch basin, sump or another drainage features. It should be a 1 foot drop (sloping downwards) for each 100 feet of pipe.

3.Not taking into account the height of the French Drain

The French Drain Mistakes are quite common when it comes to construction projects. It is essential to consider the length that the drain is when planning your project.

The size of the French Drain must be considered when planning a project but it’s sometimes difficult to figure out that number. To assist you in understanding how to determine this There are numerous helpful informational graphics online that guide every step thoroughly.

4. Uncertain of the Zoning Regulations

It is crucial to ensure that the French drain does not block anyone’s property or public space. Both of these scenarios could trigger legal penalties. To avoid this, it is recommended to consult the building authorities in your area.

In your locality drainage projects could be limited by building requirements as well as community rules or zoning regulations. Therefore, you must verify your plans with local development, zoning or homeowner’s association. To ensure that you don’t dig into an underground utility line the appropriate authorities will mark your land using paint or an eagle.

Before beginning any undertaking of this magnitude you must check with the city’s government department. They’ll have regulations for zoning and regulations in place on the proper installation of the French drainage system.

5. There is not enough gradient in the pipes to permit proper drainage

French drain French drain is an drainage system made up of a trench that has an opening at the bottom, and sloped sides. It’s designed to eliminate excess water off the soil and keep it from accumulating over the top of the ground.

The most frequently-repeated French drain blunders include:

  • Leaving an opening at the bottom of the pipe;
  • Not having enough slope in the pipe to allow for proper drainage;
  • Not digging down deep enough or
  • Make sure you use an item that is too small to meet your needs.

The pipe must be placed with an angle that permits adequate drainage. If the pipe is not correctly installed, water can build up around the pipe, causing damage to the french drain in the foundation.

We can prevent this issue by installing a draining tile in order to direct water to the french drain in the foundation of your house or business.

6. Inability to line the Trench

Fabric is recommended to cover the French drain. If you can it is possible to use a continuous strip of water-permeable landscaping fabric is the ideal.

If not, cross-stitch the pieces of cloth to a minimum of 12 inches (one foot) when needed. However, staples that are driven into the ground must be used to tie each end of your fabric. Fold the fabric over in both directions as the fabric is laid out, and reduce it at a later time.

It is also essential to ensure that the fabric is overlapping in the correct flow direction. To put it in another way the the high side of the trench must overlap the fabric on its lower side.Fabric lining must always be used during the construction to prevent a huge French drain error.

When is the best time to use of the French drain?

An French drain can be described as a trench constructed below surface to drain the water. It is possible to use the French drain to stop water from entering your basement, home, or your garden. The trench is typically comprised of stone, concrete or brick. It has perforated pipes which are positioned in top of the trench.
If you’re experiencing any plumbing problems, such as leaky pipes, clogs or backup to your septic tank, then you must consider installing the French drain. It will assist you in getting rid of the excess water and stop any flooding that might occur within your home.

Why you should consider professional Installing Your French Drain

You can clearly see that a lot of issues can occur when installing the French drain. In addition, these are just the most frequent French drainage mistakes.

There are a variety of ways to clog the French drain. In this regard, it could be beneficial to employ a seasoned expert to handle the task.

A poorly installed French drain could result in water accumulating inside your house. For instance, it could result in the basement flooding during the summer months.

It’s crucial to consult an expert when the French drain is near your house. In this case, the French drain can influence the natural flow patterns on your land. If it is not done correctly the drainage system could be more harmful than beneficial.

An Easy Device that’s Not Always Easy to Install

In some cases the installation of the installation of a French drain may pose significant difficulties. It could require the use of engineers or heavy-duty equipment.

If you’re experiencing an issue with a minor issue of flooding in your yard it’s likely you can set up the French drain system with success. If, however, you’re experiencing severe flooding or require to prevent water from getting into the basement of your home, then you’ll likely require the help of an expert. Doing the French drain installation without having the appropriate experience and the right equipment may result in additional time and money.

Additionally, the landscaping required when setting up the French drain can be more difficult than it appears. For instance, the majority of French drains require ditches that are approximately a foot wide with a depth of 18″ deep. For each foot of digging it will require you to dig one and one-half cubic feet worth of soil.

10 feet of soil weighs about 100 pounds. That’s right for each 10 feet in the trench is dug, it will be moving around 1500 pounds of soil.

It is also necessary to use over half an inch gravel per 10 feet drainage. A yard of gravel could weigh between 2400 and 2900 pounds. At the very end, you’ll likely save money, time and stress by hiring an expert.


French drains are an extremely popular method to keep the foundation of your home free of dirt and dry. They’re also an important aspect of ensuring your home’s security.

The French drain refers to a trench that has the ability to draw rainwater from below prior to it reaches your crawl space or basement. This trench should be filled with substances which will remove dirt, sand and other undesirable materials so that it’s simple for dirt and other unwanted materials to be trapped within the trench and not be able to escape.

Many are setting up new French drains as part of construction or retrofitting older houses. Therefore, always remember that French Drain Mistakes. Don’t attempt to make French Drain errors.

1 thought on “[UPDATE] Don’t Ignore These 6 French Drain Mistakes!”

  1. Pingback: Cracks In Walls : Causes , Types And Costs Of Repair

Leave a Reply

%d bloggers like this: